Welcome to our Knowledge Base
Project: Wifi and Switch Controlled Fireplace
Summary
- Project Overview
- Bill of Materials
- Prerequisites
- Project Guide
- References
Project Overview
Build an inexpensive wifi enabled fireplace switch that retains wall switch functionality, works with homeassistant and can be voice controlled.
Bill of Materials and Tools
| Picture | Reusable or on-hand tools |  |
 | CH340 USB to ESP8266 ESP-01 WiFi Module Adapter X2 | 5.99 |
 | Solder Wire and Rosin Paste Kit | 9.99 |
 | SE Professional Quality 4-1/2″ Flush Cutter | 4.97 |
 | 32 Pcs Double Sided PCB Board Prototype Kit | 10.99 |
| Misc | Soldering iron, screw drivers, wire stripers, drill and small drill bit, Jumper wires | |
| Project Specific (with some leftovers) | ||
 | ESP8266 ESP-12 ESP-12F CH340G CH340 V2 USB WeMos D1 Mini WIFI Development Board 3.3V With Pins | 10.19 |
 | 5V Relay Module Board Shield KY-019 LED Indicator + 3pcs 20CM 10Pin Female Male Dupont Jumper Wires (Just need 1 of these and 3 Jumpers) | 8.99 |
 | 5V 2A Power Adapter with US Plug and Fixed Micro Cable | 6.79 |
 | 10 Pcs 2 Way AC 300V 10A PCB Terminal Block Connector 5.0mm Pitch Blue (Just need one of these) | 3.62 |
| Total Project Estimate | 29.59 | |
Prerequisites
- Computer with internet access
- Installed and working software including
Project Guide
Wiring Diagram
Tasmota Configuration
D1 Mini Pinout Documentation. https://docs.wemos.cc/en/latest/d1/d1_mini.htm
References
- Automated Home Party